RANGEHOOD PRESSURE RELIEF CONTROL SWITCH

Product Information Printable Information Sheet

Instructional Materials Installation Guide AirCycler® g1 Wiring - RangeRelief AirCycler® g2 Wiring - RangeRelief Alternate RangeRelief Wiring Options

Quick Links Purchase RangeRelief Purchase RangeRelief with Motorized Damper

The RangeRelief™ Rangehood Pressure Relief Control Switch works with any AirCycler­® motorized damper-based system to provide automatic rangehood pressure relief. By simply installing the RangeRelief™ Pressure Switch with the already existing motorized damper, RangeRelief will open the damper allowing make up air to enter, as soon as the rangehood is turned on.  

FEATURES & BENEFITS Simple, low cost solution for solving depressurization issues Compatible with any AirCycler® motorized damper-based system Adjustable over a wide-range of pressure, 20-200 Pa Easy two wire installation

SPECIFICATIONS

Max Operating Pressure 10kPa Pressure Range 20 ~ 200 Pa ±15% Operating Temperature -40°C to 85°C Electrical Rating 1.5A (0.4A) / 250V Mounting Diaphragm in any vertical plane

WIRING DIAGRAM

 

 

 

 

 

 

 

OPTIONAL WIRING FOR USE WITHOUT AIRCYCLER® FURNACE FAN CONTROLLER

Typically, the RangeRelief is installed with the full AirCycler® motorized damper-based system, which includes a motorized damper and AirCycler® furnace fan controller. The controller supplies the power to the motorized damper.

If you are installing the RangeRelief without an AirCycler® furnace fan controller, we recommend using a doorbell transformer to power the motorized damper. See wiring diagram below:

WIRING DIAGRAM

 

The RangeRelief can also be purchased with an AirCycler® motorized damper in one convenient kit. (Doorbell transformer should be purchased separately.)

Get more information and pricing here.